The Best Mouse Sensitivity for Wuthering Waves and How to Fix Issues

Mouse sensitivity for Wuthering Waves has become a hot topic among online gamers since the game’s release.

Whether you’re diving into intense boss fights, exploring Solaris-3, or battling in real-time against elite enemies, your mouse controls need to feel precise and responsive.

Unfortunately, that hasn’t always been the case for PC players. Many are reporting awkward sensitivity behavior, unintentional camera acceleration, or broken input after patches.

In this article, we’ll walk through what’s going wrong, how to fix it, and how to find the best mouse sensitivity setup for your playstyle. Let’s get into it.

Known Mouse Sensitivity Issues in Wuthering Waves

Despite being a polished game in many areas, Wuthering Waves on PC has been frustrating for mouse and keyboard players. Here are some of the most common issues reported by players across Reddit, Steam, TikTok, and Discord.

1. Inconsistent Sensitivity Between Sessions

This is one of the most discussed problems. Players set a preferred sensitivity only to log back in later and feel like everything has changed, without touching a single setting. Sometimes it feels too slow, other times way too fast. The cause? Most likely automatic resets or hidden camera smoothing after game updates.

Source: Reddit

2. High Mouse Polling Rate Causing Weird Behavior

Several users have noted that high polling rates (like 1000 Hz or 8000 Hz) make the game behave strangely. This includes jittery movement, beeping noises, and hyper-sensitive turning. Lowering it to 125 or 500 Hz fixes things for many.

“As soon as I dropped my mouse polling rate from 1000 Hz to 125 Hz, the game stopped freaking out. No more stutter, no more weird camera jumps.” – Reddit user

3. Acceleration and Smoothing Still Active

Even when you disable these in-game (or assume they’re off), Wuthering Waves seems to apply some level of mouse smoothing or camera acceleration. This leads to unpredictable movement when trying to aim or pan around quickly, especially noticeable for low DPI users.

4. Sensitivity Drops After Menu or Cutscenes

After opening the inventory or coming back from a cutscene, the mouse sensitivity sometimes feels cut in half. This issue may be related to the camera being “reset” by the engine temporarily.

5. Deadzones or Input Lag

Some players report a slight lag when moving the mouse — not enough to be full-blown latency, but enough to feel mushy or floaty. Others talk about having to move the mouse a certain distance before the camera responds, a classic sign of a poorly adjusted deadzone.

How to Fix These Mouse Sensitivity Issues in Wuthering Waves

Thankfully, the community has been digging in and finding some reliable fixes. While Kuro Games hasn’t officially acknowledged every issue, there are several ways you can get your mouse working smoothly again.

1. Lower Your Polling Rate

This one has fixed a lot of problems for people. If you’re using a high-end gaming mouse with 1000 Hz or even 8000 Hz polling, try lowering it to 500 Hz or even 125 Hz. This doesn’t just reduce issues in Wuthering Waves: it can also improve compatibility with other Unreal Engine games.

• How to do it: Most gaming mice come with software (like Logitech G Hub, Razer Synapse, etc.) where you can manually set the polling rate.
  

2. Edit the Input.ini File

The game is built on Unreal Engine, so you can tweak its behavior manually via configuration files.

Here’s how to do it:

1. Navigate to:

C:\Users\<YourName>\AppData\Local\WutheringWaves\Saved\Config\WindowsNoEditor\

2. Open or create Input.ini.
3. Add or adjust these lines:

bEnableMouseSmoothing=False

bDisableMouseAcceleration=True

bUseWindowsMouseInput=True

bViewAccelerationEnabled=False

4. Save and close the file.
5. Optionally, right-click the file, go to Properties, and mark it Read-only so game updates don’t overwrite your settings.

3. Turn Off Windows Pointer Precision

This setting in Windows can interfere with in-game sensitivity. It’s basically mouse acceleration on an OS level.

• Go to Control Panel → Mouse → Pointer Options
• Uncheck “Enhance pointer precision”

This makes sure Windows isn’t secretly accelerating your cursor.

4. Check In-Game Settings After Patches

Some patches reset your preferences. Always double-check the in-game control settings after updates to ensure smoothing, acceleration, and sensitivity haven’t been modified.

What’s the Best Mouse Sensitivity for Wuthering Waves?

Here’s the truth: the best mouse sensitivity is personal. What works for someone with a 1440p monitor and 800 DPI might feel sluggish for someone on 1080p and 1600 DPI. But there are some good baseline settings that have worked well for many players.

Recommended Settings:

• DPI: 400 to 800
• In-game sensitivity:
  • Around 20–30 for precision and combat
  • Up to 60 if you like fast turns or play at high DPI
• Polling rate: Stick to 125 Hz or 500 Hz
• Disable acceleration and smoothing (via both in-game and config files)

If you play other fast-paced games like Genshin Impact, Valorant, or Overwatch, your muscle memory will thank you for using similar settings across the board.

Try this: set your DPI to 800, your in-game sensitivity to 30, and make sure all smoothing and acceleration is disabled. Play for 10–15 minutes. If it feels too slow, bump it up to 40. If it feels twitchy, drop to 20.

How to Change Mouse Sensitivity in Wuthering Waves

There are two main ways to adjust your sensitivity, and it depends on whether you want a quick tweak or full control.

A. Change It In-Game

1. Launch the game
2. Open Settings
3. Go to the Controls tab
4. Look for Mouse Sensitivity or Camera Sensitivity
5. Adjust Horizontal and Vertical sensitivity sliders
6. Apply changes and test them in a safe area (like a town or empty field)

Tip: If there’s an “Advanced” section in controls, check for options like camera smoothing or inertia. Turn them off.

B. Use Config Files

As mentioned earlier, you can fine-tune behavior using Input.ini. Not only does this give more control, but it also lets you eliminate hidden smoothing and odd default values.

Example sensitivity tweak:

AxisConfig=(AxisKeyName=”MouseX”,AxisProperties=(DeadZone=0.000000,Sensitivity=0.3,Exponent=1.0,bInvert=False))

AxisConfig=(AxisKeyName=”MouseY”,AxisProperties=(DeadZone=0.000000,Sensitivity=0.3,Exponent=1.0,bInvert=False))

Play around with the Sensitivity value to find what feels best. You may want to keep both X and Y the same for even movement.

How to reduce lag in Wuthering Waves?

NoPing is a service designed to optimize your route to Wuthering Waves’ servers. Sometimes, the normal path your internet provider uses isn’t the fastest. NoPing reroutes your data through a better, more direct path.

Here’s how to use NoPing to reduce lag in Wuthering Waves:

• Sign-up through the website and download NoPing (you can try it for free)
• Open NoPing and search for Wuthering Waves inside the software

• Once you find Wuthering Waves, click on it and, on the next screen, select “Choose automatic” or “Choose manual” and click “Continue”. We recommend choosing automatic, as NoPing’s technology analyzes all routes on a global scale and automatically selects the best option for you.

• On the next screen, click on “Optimize Game”.

• And that’s it, you can start playing Wuthering Waves with optimized ping!

You can test different servers within NoPing to see which gives you the lowest latency.

FAQ

Q: Why does Wuthering Waves sensitivity feel weird compared to other games?
A: It’s likely due to hidden camera smoothing, acceleration, and sensitivity scaling based on resolution and polling rate. Unreal Engine also has odd default input curves, which you can fix with manual config edits.

Q: My mouse is skipping and jittery. How do I fix that?
A: Lower your polling rate to 500 or 125 Hz, disable Windows pointer precision, and turn off smoothing/acceleration in your config files.

Q: I set my sensitivity but it keeps changing. Why?
A: Some patches reset control settings. Others temporarily change camera settings after cutscenes or menus. Make your config file read-only to prevent changes.

Q: Will there be an official fix from Kuro Games?
A: The community has requested a raw input toggle or more advanced mouse settings. So far, no confirmation has been given. But demand is growing.

Q: What’s better for aiming: high DPI with low sensitivity or low DPI with high sensitivity?
A: Both work, but high DPI + low sensitivity tends to offer smoother control. Just make sure your in-game sensitivity isn’t so low that you can’t do quick turns.

Wuthering Waves is an impressive online game, but its mouse input quirks can really take you out of the experience, especially if you’re coming from fast, responsive games like Apex Legends or Valorant.

The good news is that with a few adjustments to polling rate, config files, and in-game settings, you can regain that tight, fluid control.

So, whether you’re dodging a boss AoE or lining up the perfect charged attack, make sure your sensitivity is dialed in, because smooth aim means smoother wins.

And to play Wuthering Waves without worrying about lag, use NoPing! Download now and start your free trial!